Terre Haute North Vocational Curriculum

COMMUNICATION PROCESSES I
T 01205 C 40
1 credit
1 term
Grades 9 - 12

This course is an exploration of the radio and television industry. Students will receive hands-on experience with studio production equipment through planned laboratory activities, projects, and demonstrations. Students will develop an understanding of the variety of career opportunities available in communication technologies. [Back]

COMMUNICATION PROCESSES II
T 01206 C 40
1 credit
1 term
Grades 9 – 12
Prerequisites: Communication Processes I
This course is a continuation of Communication Processes I. This class is responsible for the production of our television broadcast. Examples are sporting events, concerts, plays, and any other production that would promote the school in a positive manner. Students work on other projects as well. They work together to build relationships with one another as well as learning and supporting each person’s ability. This class involves time OUTSIDE OF CLASS and is a very rewarding experience. [Back]

DESIGN PROCESSES I
T 01215 C 40
1 credit
1 term
Grades 9 –12

This course investigates the importance and needs to develop problem-solving skills to help make students more technologically literate by using the interdisciplinary approach. Hands-on learning activities are used to help develop a technical base for the students. Examples of activities include landscaping, concrete finishing, construction, general safety, use of hand and power tools, and woodworking projects. This class will do service work for the school in areas that will give the students the self-esteem and pride in themselves. [Back]

CONSTRUCTION PROCESSES I
(Intro to Construction Trades)
T 01231 C 40
1 credit
1 term
Grades 9 - 12

This basic construction course introduces students to the building trade's area. Residential construction is used as a basis for instruction in the following: planning a house, blueprint reading, selection of a site, layout of a house on a lot, preparing and pouring footings, foundation walls, plumbing, carpentry, electrical wiring, heating and air conditioning, ventilation, interior and exterior finishing, and cost estimating. [Back]

CONSTRUCTION PROCESSES II
(Advanced Intro to Construction Trades)
T 01232
1 credit
1 term
Grades 9 – 12

This course will help students understand how technology is used to construct our environment. Students will learn how buildings provide physical conditions people want and need for themselves, their activity, and their things. Students will study construction of topics such as preparing the site, doing earthwork, setting footings and foundations, building the superstructure, enclosing the structure, installing systems, finishing the structure, and completing the site. Students will also investigate buying and maintaining a structure. [Back]

CONSTRUCTION TECHNOLOGY SYSTEMS
(Woodworking)
T 01235 C 40
1 credit
1 term
Grades 9 - 12

With this course students will have the opportunity to work in small groups building various structures and projects. Students will learn the basic use of hand tools, portable power tools, most large power tools, and common wood joints. Students will also be involved in blueprint reading and the construction of projects with the emphasis on correct methods of assembly and manufacturing, plus the use of finishes. [Back]

GRAPHIC ARTS TECHNOLOGY I
(Printing)
T 01253 C 40
1 credit
1 term
Grades 9 - 12
Recommendations: Keyboarding

Students taking this course will obtain experience in using tools and processes relating to Graphic Communication. Students will study the history of printing from past to present printing methods. Approximately 30 - 40 % of the class time will involve lectures, demonstrations, and other types of classroom activities. The remaining time will be spent in student-centered laboratory activities aimed at reinforcing classroom discussion. Student activities will include: layout and design work, photography and darkroom procedures, strip-up work, burning and processing plates, offset, press operations, and binding and collating. [Back]

GRAPHIC ARTS TECHNOLOGY II
(Printing)
T 01254 C 40
1 credit
1 term
Grades 9 – 12
Prerequisite: Graphic Arts Technology I
Recommendations: Keyboarding

This course is recommended for students who desire further instruction and experience in the field of graphic arts. Students will be involved in numerous individual as well as group projects in typesetting, paste-up, layout and design, darkroom, strip-up, presswork, and bindery. Class required projects along with some school corporation work will take place to give students a “hands on” realistic look at what goes on in the printing industry. [Back]

TECHNOLOGY SYSTEMS I
T 01261 C 40
1 credit
1 term
Grades 9 - 12

The modular approach to learning in this course provides the student with opportunities to create and experiment with a variety of computerized and controlled driven equipment resembling that used in business and industry. Experiences in different areas of technology will include IBM computer applications, Computer Aided Drafting (CAD), Computer Numerical Control (CNC) Programming, Milling Processes, Bio Technology, Pneumatics, Hyper Studio, Desktop Publishing, Intro to Keyboarding Skills, Flight Simulations, Sim City, Graphics, Audio-Video Production, Power Point presentations, Weather and Satellites, and Space Shuttle. This course provides several brief experiences in which to choose a course of further study or career. Upon completion of this course, each student will have a deeper understanding of the technology areas and will have a greater understanding as to which course he/she should enroll in for the next term in the Technology/Career Department. [Back]

TECHNOLOGY SYSTEMS II
T 01262 C 40
1 credit
1 term
Grades 9 - 12
Prerequisite: Technology Systems I

Applications studied in Technology Systems I will be enhanced in this course. Students will work on projects individually and in groups to further their understanding of the different software programs. [Back]

TRANSPORTATION PROCESSES
T 01281 C 40
1 credit
1 term
Grades 9 – 12

A specialized course that explores technology processed used to move people and cargo in vehicles and by other means on land, in water, air, and space. Classes involve problem-solving activities as well as working as a group member on decision-making tasks that enhance individual growth and development. [Back]

MACHINE TOOL OPERATION I
V 01591 – V 01592 – V 01593 C 40
1 - 3 credits
1 - 3 terms
Grades 9 – 12

This course is offered to any Freshman, Sophomore, Junior, or Senior student interested in machine operation. Machine Tool Operation is a specialized course of study that explores the operations used in the machine industry. The course will include related skills in safety, blueprint reading, related mathematics, measurements, and material types. The student will learn how to operate machinery such as metal saws, grinders, metal lathes, and drilling machines. Safety is stressed throughout the course activities. Integration into other fields of study is highly encouraged. Note: Students can further their study in two (2) hour block classes in Advanced Machine Tool Operations. [Back]

DRAFTING I-1
(Mechanical)
V 01635 C 40
1 credit
1 term
Grades 9 – 12

This class teaches drafting fundamentals and basic constructions. As you proceed in the course, you will become familiar with the drafting methods and processes used by industry. You will develop and practice drafting skills and techniques related to the development of graphic communications. The students are given the opportunity to express ideas graphically through the use of drafting instruments and to understand the graphic language as practiced in the mechanical world. Note: Students can enroll in Drafting I Autocad or Architectural during the second or third terms with instructor approval. [Back]

DRAFTING I-2
(Autocad)
V 01636 C 40
1 credit
1 term
Grades 9 – 12

The introduction of computer-aided design (CAD) has meant a major change in the tools used in drawing and design. It has also caused a change in the methods and thought patterns used in the creation of those drawings. This course provides comprehensive coverage of introductory and two-dimensional Autocad with emphasis on mechanical technology. Note: Students can enroll in Drafting I Architectural during the third term with instructor approval. [Back]

DRAFTING I (Architectural)
(Architectural)
V 01637 C 40
1 credit
1 term
Grades 9 – 12

The student must have completed Drafting I (Mechanical). The architectural class will focus on the design, construction, and drafting techniques needed to design and draw a family dwelling. [Back]

ELECTRICITY/ELECTRONICS
V 01651 – V 01652 – V 01653 C 40
1 – 3 credits
1 – 3 terms
Grades 9 – 12

This program focuses on DC (Direct Current) circuit including voltage, current, resistance, and power relationships. Magnetism, electromagnetic induction, and various methods of analyzing AC and DC circuits are investigated and evaluated through calculations and hands-on verification with test equipment. Computers will be a big part of this program along with transformers and filter circuits. [Back]

CISCO NETWORKING ACADEMY
The Cisco Networking Academy is a two-year vocational program for 11 th and 12 th grade students who have an interest in computer networking. The Cisco Networking Academy is designed to help students develop the basic skills needed in the computer networking field. If students are to be competitive in the future workforce, they need the opportunity to start developing those skills now. Particular emphasis is given to the use of decision-making and problem-solving techniques in applying science, mathematics, communications, and social studies concepts to solve networking problems. [Back]

CISCO NETWORKING ACADEMY - Course 1
V 01665 C 40
1 credit
1 term
Grades 11 – 12

This is the first of four courses to provide students with classroom and laboratory experience in current and emerging networking technology that will empower them to enter employment and/or further education and training in the computer networking field. Instruction includes, but is not limited to safety, networking, network terminology and protocols, network standards, LANs, WANs, OSI models, cabling, cabling tools, routers, router programming, star topology, IP addressing, and network standards. [Back]

CISCO NETWORKING ACADEMY – Course 2
V 01666 C 40
1 credit
1 term
Grades 11 – 12
Prerequisites: Cisco Networking Academy – Course 1

This is the second of four courses to provide students with classroom and laboratory experience in current and emerging networking technology that will empower them to enter employment and/or further education and training in the computer networking field. Instruction includes, but is not limited to safety, networking, network terminology and protocols, network standards, LANs, WANs, OSI models, Ethernet, Token Ring, Fiber Distributed Data Interface, TCP/IP Addressing Protocol, dynamic routing, routing, and the network administrator’s role and function. [Back]

CISCO NETWORKING ACADEMY Course 3
V 01667 C 40
1 credit
1 term
Grades 11 – 12
Prerequisites: Cisco Networking Academy Courses 1 & 2

This is the third of four courses designed to introduce new content and extend previously learned networking skills which will empower the student to enter the workforce and/or further their education and training in the computer networking field. Instruction introduces and extends the student’s knowledge and practical experience with switches, Local Area Networks (LANs) and Virtual Local Area Networks (VLANs) design, configuration, and maintenance. Students will develop practical experiences in skills related to configuring LANs, WANs, Novell networks, Internetwork Packet Exchange (IPX) routing and Interior Gateway Routing Protocol (IGRP) protocols and network troubleshooting. [Back]

CISCO NETWORKING ACADEMY – Course 4
V 01668 C 40
1 credit
1 term
Grade 11 - 12
Prerequisites: Cisco Networking Academy Courses 1, 2, & 3

This is the fourth of four courses designed to introduce new content and extend previously learned networking skills which will empower the student to enter the workforce and/or further their education and training in the computer networking field. Instruction introduces and extends the student’s knowledge and practical experience with Wide Area Networks (WANs), Integrated Services Data Networks (ISDN) and Point-to Point Protocols (PPP) and Frame Relay design, configuration, and maintenance. Students will develop practical experiences in skills related to configuring WANs, ISDN, PPP, and Frame Relay protocols and network troubleshooting. [Back]

COSMETOLOGY
V 01511 – Summer Session
V 01514 – 1 st Trimester
V 01515 – 2 nd Trimester
V 01516 - 3 rd Trimester
8 credits C 40
3 terms & Summer Session
Grade 12
Prerequisite: Interview & attendance in the summer program

The Career Cosmetology Program is for senior students who are selected on the basis of written applications and personal interviews. Students enter full-time training at Harrold’s Beauty Academy during the summer before their senior year. During the school year, students attend classes at North during the morning and then receive training at the beauty college in the afternoon. The complete course requires a minimum of 1500 clock hours, 20 hours weekly. Cosmetology is a program to develop skills and knowledge in performing a variety of beauty treatments, including care and beautification of the hair, complexion, and hands. Skills needed include creativity, finger dexterity, eye-hand coordination, and the ability to relate to people. The program is designed to prepare students for the State Board of Beauty Culture examination which allows them to practice as a cosmetologist in the State of Indiana. The Vigo School Corporation provides a tuition credit for each enrollee; however, the balance for the complete course of instruction is the responsibility of the enrollee. Note: Students must enroll the summer before their senior year. This class meets two periods for all three terms plus the summer before their senior year. [Back]

CONSTRUCTION TRADES I
(Building Trades)
V 01521 – V 01522 – V 01523 C 40
2 - 6 credits
1 - 3 terms
Grades 10 - 12
Prerequisite: Construction Processes I with a "C" or better grade

This two-year program begins in the sophomore year. Enrollment is limited to a total of thirty (30) students from the three Vigo County high schools. Students will be chosen through an application process. Transportation to and from the project site will be provided. Construction Trades prepares students for careers in the construction trades by utilizing a residential building project approach. Students will receive instruction in the areas of carpentry, plumbing, electrical wiring, heating and air conditioning installation, masonry, and roofing. Students spend onethird of the program time with related math, blueprint reading, measurement, material selection and utilization, codes and the characteristics of thermal and sound installation. Approximately two-thirds of the student's time is spent developing skills and applying knowledge through the construction of the residential project. Students complete a residential home, ready for sale, by the end of each school year. It is recommended students take Construction Processes I and Construction Technology Systems I as a freshman or sophomore to prepare for the Construction Trades Classes. [Back]

CONSTRUCTION TRADES II
(Building Trades)
V 01524 – V 01525 – V 01526 C 40
2 – 6 credits
1 – 3 terms
Grade 11 - 12
Prerequisite: Construction Trades I

This is the advanced program for juniors and seniors only. [Back]

MEDICAL CAREERS I
Medical Careers I is offered to students in the tenth, eleventh, and twelfth grades that are interested in pursuing a career in the medical or related fields. Three terms are available, each offering different knowledge, skills, and information necessary for making informed career choices. [Back]

MEDICAL CAREERS 1 (INTRODUCTION)
V 01535 C 40
1 credit
1 term
Grades 9 - 12
By taking this course, students interested in a medical career are offered the opportunity to investigate the many professional and entry-level positions available in today's workforce. They will identify the education, skills and attitude necessary to be successful for providing health care. This introduction includes skills in infection control, communication and documentation, some medical terminology, and knowledge of the ethical and legal responsibilities of today's health care team. [Back]

MEDICAL CAREERS 2 (SKILLS)
V 01536 C 40
1 credit
1 term
Grades 9 - 12

In this course, the students will acquire knowledge of how the body functions in health and in disease. They will develop skills necessary for patient care and rehabilitation including monitoring vital signs, body mechanics, range of motion, monitoring fluid intake, and simple specimen testing. [Back]

MEDICAL CAREERS 3 (TERMINOLOGY)
V 01537 C 40
1 credit
1 term
Grades 9 - 12

Students will engage in a simplified anatomical systems approach to learning and using medical terminology within this course. It is required of students preparing for Medical Careers II and is recommended for students interested in fields of the medical pre-professional, nursing, or therapy. Business students planning a career in medical office application would profit from this course as well. [Back]

MEDICAL CAREERS II
Medical Career II is offered to students in the twelfth grade that have completed at least Medical Career (Skills) and Medical Careers (Terminology). Students must take Medical Careers (Foundations) and at least one of the other two terms offered. A recommendation from their Medical Careers I instructor is required. [Back]

MEDICAL CAREER 1 (FOUNDATIONS)
V 01538 C 40
2 credits
1 term
Grade 12

In this course, students are prepared to apply the skills acquired in Medical Careers I. They are certified in First Aid/CPR and taught the personal skills necessary for interaction with the professional medical staff as well as with the patient. Several job-shadowing experiences are offered to assist students in narrowing their internship choices. The students are provided the opportunity to discover the many allied health care programs offered by the colleges
and vocational schools in the community and state. [Back]

MEDICAL CAREER 2 (INTERNSHIPS)
V 01539 C 40
2 credits
1 term
Grade 12

By taking this course, students are prepared in the specific skills necessary for productive and educational internship experiences. The student may choose two five-week or one ten-week internship in any allied healthcare area. Nursing assisting certification is offered to interested students. These opportunities provide the student with on-thejob
experience, using real job skills. [Back]

MEDICAL CAREERS 3 (SENIOR OPTION)
V 01540 C 40
2 credits
1 term
Grade 12
Prerequisite: Instructor recommendation

If students desire further internship experiences to develop more extensive skills, they can choose to do an additional
ten-week internship. [Back]

AUTO MECHANICS I
V 01544 – V 01545 – V 01546 C 40
2 – 6 credits
1 - 3 terms
Grades 10 – 12
Recommendations: Electricity

Instruction is divided into nine different areas. (1) general automotive maintenance (2) engine repair (3) engine performance (4) electrical systems (5) suspension and steering (6) manual drive train and axles (7) automatic transmissions (8) brake system (9) heating and air conditioning. Safety is stressed at all times. The goal for each student is to gain entry-level skills in as many areas as possible. Juniors and seniors may take part in the dual enrollment agreement with Ivy Tech Automotive. Courses include chassis and suspension systems, brake systems, engine rebuilding, and engine principles.
Note: This class meets two periods all 3 terms. Students may earn 6 credits per year. To be eligible for Automotive Mechanics II, the student must complete Automotive Mechanics I, terms 1, 2, 3, or any combination and earn a C or better grade. [Back]

AUTO MECHANICS II
V 01550 – V 01551 – V 01552 C 40
2 - 6 credits
1 - 3 terms
Grade 11 - 12
Prerequisite: Auto Mechanics I

This is the advanced program for juniors and seniors only. [Back]

AUTO BODY REPAIR I
V 01558 – V 01559 – V 01560 C 40
2 - 6 credits
1 - 3 terms
Grades 10 - 12
Prerequisite: Auto Mechanics, Welding, Electricity/Electronics

Auto Body Repair is designed to offer instruction in operations and techniques of tools and equipment common in the auto body repair trade. This course contains a total of 1,140 class and laboratory hours of instruction. The objectives of this course are to pursue skills and knowledge necessary to prepare the students for entry into the auto body repair trade industry. Additional objectives are to develop proper student attitudes, interest, work habits, employee-employer relations, and other abilities needed to become a successful worker. We recognize that in the process of delivering instructions, we must provide a safe working environment and emphasize safety at all times. Every student will be provided with safety instruction throughout all aspects of the auto body repair laboratory and instruction how to use the tools and equipment. [Back]

AUTO BODY REPAIR II
V 01564 – V 01565 – V 01566 C 40
2 – 6 credits
1 – 3 terms
Grade 11 - 12
Prerequisite: Auto Body Repair I

This is the advanced program for juniors and seniors only. [Back]

GRAPHIC/PRINTING COMMUNICATION I
V 01574 – V 01575 – V 01576 C 40
2 – 6 credits
1 – 3 terms
Grades 10 – 12
Prerequisite: Graphic Arts Technology I, with a C average or better
Recommendations: Keyboarding

This course is recommended for students who desire further instruction and experience in the field of graphic arts. Students will be involved in numerous individual as well as group projects in typesetting, paste-up, layout and design, strip-up, presswork, and bindery. Class required projects along with some school corporation work will take place to give students a hands on realistic look at what goes on in the printing industry. [Back]

GRAPHIC/PRINTING COMMUNICATION II
V 01580 – V 01581 – V 01582 C 40
2 – 6 credits
1 – 3 terms
Grade 11 - 12
Prerequisite: Graphic Printing/Communication I

This is the advanced program for juniors and seniors only. [Back]

MACHINE TOOL OPERATION I
V 01594 – V 01595 – V 01596 C 40
2 - 6 credits
1 - 3 terms
Grades 10 - 12
Recommendations: Drafting I (Mechanical)

This course provides theory and application experiences used in many facets of the Machine Tool Industry. This course is designed to give the student application activities in a meaningful laboratory experience. Safety is stressed at all times. Areas covered include related math, related blueprint reading, precision measurement, various types of hand tools, standard operating procedures for metal saws, metal lathe, drill presses, grinders, horizontal and vertical milling machines, EDM-electrical discharge machines, and CNC-computer numerical control milling. Various industrial sites in the community offer junior students the opportunity to do job shadowing for 1-2 weeks per year, and senior students have the opportunity to do the School-to-Work program for a term. These programs will enhance individual growth and self-confidence in the work force. Dual credit through Ivy Tech is available. [Back]

MACHINE TOOL OPERATION II
V 01614 – V 01615 – V 01616 C 40
2 – 6 credits
1 – 3 terms
Grade 11 - 12
Prerequisite: Machine Tool Operation I

This is the advanced program for juniors and seniors only. [Back]

WELDING I
V 01624 – V 01625 – V 01626 C 40
2 - 6 credits
1 - 3 terms
Grades 10 - 12

Welding is a course which provides the student basic instruction from oxyacetylene and electric arc welding to more complex welding techniques. These include plate welding, gas tungsten, and semi-automatic arc welding. Considerable time is spent on practice welding to develop student skill. Special welding problems will be introduced to insure maximum learning on the part of the student. Modern welders are available including heli-arc and micro wire in addition to oxyacetylene equipment, along with plasma arc cutting. [Back]

WELDING II
V 01630 – V 01631 – V 01632 C 40
2 – 6 credits
1 – 3 terms
Grades 11 - 12
Prerequisite: Welding I

This is the advanced program for juniors and seniors only. [Back]

DRAFTING I (MECHANICAL) CTP
V 01638 – V 01639 – V 01640 C 40
2 - 6 credits
1 - 3 terms
Grades 10 - 12

This beginning career drafting class provides the student an extensive background in mechanical drafting. Units covered in this course will help to prepare the student in drafting techniques used currently in industry. Note: To be eligible for Drafting II, the student must complete a minimum of two hours of Drafting I and earn a "C" or better grade. [Back]

DRAFTING II (ARCHITECTURAL)
V 01644 – V 01645 – V 01646 C 40
2 - 6 credits
1 - 3 terms
Grades 11 - 12

Prerequisite: A "C" or better in Drafting I (Mechanical)
This class will expand on the previous units covered in Drafting I and offer the student an opportunity to explore
architectural drafting. [Back]